Static pressure molding technology e bua ka phallo ea moea e nang le hydraulic multi-piston squeeze compaction technology, ho latela bothata ba compaction, e ka khetha feela hydraulic multi-piston squeeze compaction kapa airflow le hydraulic multi-piston squeeze compaction.
Static Pressure e na le melemo e latelang.
◆Bokhoni bo phahameng ba lehlabathe le kopaneng, hlobo e thata le e teteaneng, e loketseng ho etsa li-castings tse rarahaneng.
◆ Dimensional botsitso le molemo holim'a roughness.
◆Bopehi bo phahameng ba ho bopa.
◆ Mould plate e sebelisoang haholo.
◆ Boemo bo botle ba ho sebetsa le ho boloka basebetsi.
Kailong Machinery e ikemiselitse ho fa bareki Mohala oa bohlokoa ka ho fetisisa oa Static Pressure Automatic Molding, ho netefatsa hore mohala oa ho bōpa o sebetsa ka katleho le ka botšepehi ka ts'ebetso e phahameng ea tlhophiso.
- Likarolo tsa mochini oa lisebelisoa tsa mantlha le tse thusang tse etsoang ka mochini oa CNC, kalafo e hlokahalang ea mocheso ho netefatsa bophelo bo nepahetseng le ba ts'ebeletso.
-PLC e tsoang SimensS7, e nang le skrineng sa ho ama le marang-rang a Ethernet jj.
-Servo system e tsoang ho SEW kapa Siemens le Variable-Frequency Drive ho tloha Rexroth.
- Hydraulic valve ea mochini oa ho bopa o tsoang ho Rexroth, Hydraulic Cylinder e tsoang ho brand e tummeng ea China.
- Likarolo tsa motlakase tse tlase tse tsoang Schneide.
- Litiiso tsa Hydraulic tse tsoang ho brand ea machabeng.
-E tsoa ho China brand e tsebahalang (HRB/LYC/ZWZ).
Mohlala oa Sets'oants'o sa Mochini o le Mong oa Phetoho ea Paterone:
Tlhaloso e Tloaelehileng ea Mohala o Mong oa Seteishene se le Mong
| Ntho | Mohlala | |||
| KSP80 | KSP100 | KSP120 | KSP230 | |
| Flask ea ka hare (mm) | 800x600x200/200 | 1000x1000x250/250 | 1200x800x350/350 | 2300x950x350/350 |
| Molding Speed (sec/cycle) | 30 | 30 | 36 | 60 |
| Khatello e khethehileng ea Squeeze (kgf/cm2) | 8-12 | 8-12 | 8-12 | 8-12 |
Sets'oants'o sa Moralo oa Mohlala oa Mochini oa Double-Station oa Pattern Exchange
Tlhaloso e Tloaelehileng ea Double-Station Molding Line
| Ntho | Mohlala | ||
| SPD80 | SPD100 | SPD120 | |
| Flask ea ka hare (mm) | 800x600x200/200 | 1000x1000x250/250 | 1200x800x350/350 |
| Molding Speed (sec/cycle) | 20 | 20 | 24 |
| Khatello e khethehileng ea Squeeze (kgf/cm2) | 8-12 | 8-12 | 8-12 |
